| Item | Location |
|---|---|
| Rheostat (10 Amp Max) | Beneath Demo Bench |
| Wire | Set 1, Front End Cap |
| Assorted Stands | |
| Small Weight | |
| DC Switch |
Set-up Instructions:
1. Connect wire in series with the DC switch and rheostat.
2. Hang weight from center of the wire.
3. Open/Close as many switches on the rheostat as needed to create a current flow of 8-10 Amps (but no more than 10 amps).
Troubleshooting: Be careful not to let the wire kink up. If that happens, attempt to straighten the wire while hot to remove kinks.