| Item | Location |
|---|---|
| Electromagnet with Plate | Set 4, Cabinet 2, Shelf 3 |
| 4-D-Cell battery holder | |
| 25-lb weight | Set 4, Cabinet 3, Shelf 5 |
| Assorted rods and clamps |
Set-up Instructions:
1. Mount magnet on a rod attached via bench clamp to the demonstration bench.
2. Attach plate to the 25-lb weight..
3. Place the weight on an aluminum plate beneath the magnet.
4. Adjust height of magnet so that there will be less than half an inch between the plate and the magnet.
5. Connect 1 of the 2 leads to the battery pack. The lecturer will connect the other lead.