| Item(s) | Location |
|---|---|
| Strong Magnetron Magnet | Set 4, Cabinet 1, Shelf 4 |
| Jumping Wire | Set 2 - Front of end cap |
| DC Switch | Switch station |
| Rheostat | Demo Bench |
| Special Ring Standx2 | Behind Toepler Device |
| Compass Needle | Set 4, Cabinet 1, Shelf 3 |
Set-up Instructions
1. Clamp DC switch to bench and plug in.
(Be sure to turn on the DC - master switch located in prep room)
2. Drape wire between the two ring stands.
3. Place compass beneath wire.
4. Connect wire in series with the DC switch an the 18A rheostat.